Auto Lamp Mould

Auto lamp mould: Our factory does not make many auto lamp moulds, about 10 sets per year on average. This type of plastic mold is a relatively high-demand mold, and the general tolerance requirements are within 0.01MM. Pay attention to the following points when making automobile lamp molds: 1. The steel of the mold must be made of genuine manufacturers. Generally, ASSAB S136 heat treatment, and NAK80, 2083ESR, 1.2343 heat treatment, etc. are used. Using the right materials, the next step is to use high-speed CNC (above 30,000 rpm) to process the rubber plane. Try to avoid EDM discharge as much as possible, and go straight out. Finally, it can be polished directly on the diamond paste. Do you have any good suggestions, welcome to guide the work on the spot: qxwmould_co_ltd@163.com

Mould Name: Auto lamp mould

Part Material: PMMA

Product Size: 36*217*18.3mm

Product Description:  Auto lamp mould

Mould Cavity: 2 cavities

Mould Size: 250*350*330 MM

Mould Cavity Steel: ASSAB S136(HRC48-52)

Mould Injection System:  2 point hot runner

Mould Ejection System:  Stripper Block

Mould Cycle Time: 50s

Mould Life Cycle: 500,000

Lead Time: 40 working days

Mold export to: Europe

Hot Tags: auto lamp mould, China, suppliers, manufacturers, factory, customized, made in China,