For a 60-cavity plastic injection mold, the difficulty in its production lies in the choice of hot runner: 1. Choose an ordinary hot runner, basically this set of molds will be scrapped, because the multi-cavity mold, the most important thing is to balance the glue, if the glue is not Balance is a product that cannot be produced by injection molding. The ordinary hot runner cannot guarantee the balance of the product's glue, so the produced mold must be useless. 2. Choose the needle valve hot runner. The advantage of this hot runner is that it can accurately control the glue time of each hot nozzle, thereby effectively controlling the balance of glue, and ensuring that the products injected from each cavity are the same. There is no doubt about using this kind of hot runner, the mold must be successful. So please trust our professionalism, welcome to call: qxwmould_co_ltd@163.com

Mould Name: 60 cavities mould

Part Material: PE

Product Size: 106.4X79.68X9.63mm

Product Description: 60 cavities mould

Mould Cavity: 60 cavities

Mould Size: 900*1100*532 MM

Mould Cavity Steel: 718H

Mould Injection System: 10 point needle valve hot runner

Mould Ejection System: ejector pin

Mould Cycle Time: 40s

Mould Life Cycle: 1000,000

Lead Time: 60 working days